SEALED Control Pot ~ LARGE, Quarter Size, LONG Shaft, A/B & OHMs
Click To Enlarge

SEALED Large Control Pot, Quarter Size, Long Shaft
Split Shaft Style Pot for Guitar or Bass
Choice of 250K or 500K ohm Style Options
Choice of Audio “A” Pot or Linear “B” Pot Style Options

Get noticeable results with this easy modification. This is a split shaft Sealed Style Pot. Sealed housing will help prevent dust and dirt from entering the pot and disrupting performance. Most players will be able to gain a more precise response to manipulation with these pots. These will work with most fine knurled, 24-spline style knobs.

This is a large, long-shaft, body-mounting control pot. If you are going through a guard, you may require additional nuts or lock washers (not included). Of course, your set-up may be different. Be sure to check your requirements in relation to the measurements provided for this item. Ask any fit or compatibility questions prior to purchase.

Your choice of OHM style: 250K or 500K. A control pot is a variable resistor controlling the signal strength. “K” is the reference to the resistance rating of the pot (kOhms). Higher pot 500K values typically lend a brightness to your sound while the 250K lower value pots typically result in a bit more playing warmth. Many players prefer pairing humbuckers with 500K pots and single coils pickups with 250K pots. You might switch it up depending on your style and what you are looking for in terms of performance.

Your choice of pot style ~ Audio (aka “A” pot or “Aud” pot) or Linear Taper (aka “B” pot or “Lin” pot). Both types of pots will be at ~0% in the min position and ~100% in the max position. Some players believe audio pots provide a smoother volume roll or transition, while others like the linear pots better for tone transitioning. It’s really a personal playing preference as performance will vary based on many factors, including style, equipment and skill.

Please check your measurements carefully to see if this item will work for your set-up.

*Sealed Housing
*Large Pot (Quarter Size)
*3 Soldering Tabs/Lugs
*Long Shaft Style Body Mount
*Split Shaft 24 Spline Style
*Metal Alloy/Aluminum Bushing
*Smooth Operation ~ Gradual Gain/Loss
*Tolerance: +/- 10%

*Shaft Length: 18mm
*Pot Diameter: 24mm
*Overall Pot Height: 34mm
*Threaded Bushing Height: 11mm
*Required Hole Diameter: 10mm
*Mounting Nut Diameter: 9mm (inner) & 12mm (outer)
*Mounting Nut Depth: 2mm
*Washer Diameter: 9mm (inner) & 14mm (outer)
*Cavity Depth Required: 14mm
Measurements provided are approximations; variability is to be expected. Ask any questions prior to purchase.

*1 Control Pot
*1 Standard Flat Washer
*1 Hex Mounting Nut
Nothing else is included. Additional images may be provided for reference and comparison purposes only.

Buyers assume all risk of use; sales are only offered to those competent to safely and lawfully purchase and use items.
ASK ANY QUESTIONS PRIOR TO PURCHASE. Instructions for installation are NOT INCLUDED or provided.
Inspect your order upon receipt; we pledge to address any issues PRIOR to installation.

  • Item #: 12048

SEALED Control Pot ~ LARGE LONG Shaft, SALE! A250, B250K, B500K

Price: $8.95
5 or more: $6.75 each
10 or more: $6.50 each
25 or more: $6.25 each
* Marked fields are required.
Qty: *
Reviews (1) Write a Review
No Reviews. Write a Review