Prewired HSS Pickguard ~ Loaded Phat Hot Duo Rails
Phat Screamer / Hot Duo Rails Build
Humbucker-Single-Single (HSS / SSH) Guard

Phat Screamer Humbucker Bridge Pickup
Duo Rail Humbucking Strat Middle Pickup
Duo Rail Humbucking Strat Neck Pickup

Your Choice of Pickup & Guard Colors
Your Choice of Wiring Styles & Upgrades

~~ITEM DESCRIPTION~~
This loaded guard is prewired on a Humbucker-Single-Single Standard Strat Pickguard cut for one humbucker at the bridge & one single coil at both the middle and neck. We’re proud to offer many options to customize your build with possibilities designed to increase uniqueness, personalization, versatility and performance. Click HERE for guard color samples and let us know if you have any questions about any of the available options. 

For this build, the Dragonfire Phat Hot Duo Rails loaded guard uses a Phat Screamer bridge humbucker to pair with our Duo Rails. This set-up is excellent for crisp, clean modern tone with power, articulation and great range of performance featuring the stand-out capabilities of our 4-wire Duo Rails for humbucker play from your standard single coil Strat slot.

~~PRODUCT HIGHLIGHTS~~
*Fits USA & Mexican (2002 & Newer) Fender Standards
*Passive 6-String Standard Guitar Pickups
*Ceramic Magnet Style
*4 Wire Pickups ~ Coil Split Capable
*Standard Spacing
*Wax Potted Pickups for Squeal Reduction or Elimination
*Fully Shielded Electronics Area
*Comes Standard w/ Sealed 5-Way Switch & Full-Size 500K Pots

~~Phat Screamer Bridge Pickup Features~~
*”Phat” Oversized Flat Top, Slug Style Exposed Polepieces
*Wound to ~ 17.5K Output
*Pole Diameter of 6.5mm & 52mm Spacing

~~Duo Rail Middle & Neck Pickup Features~~
*Dual Rail, Double Blade Rail Style
*Hottest Passives DFG Offers in Single Coil Size
*Wound to ~12.0K Output

This build is available in many colors/styles with a variety of personalization and upgrade options. Your selections and any addition of effects or upgrades will determine ultimate layout and functionality and may necessitate substitution of component styles depending on options chosen at our discretion. Onboard effects and circuit information can be found here. Let us know if you have any questions regarding options or selections.

For standard installation, all you do is solder the included wires to your input jack and bridge ground, and you're ready to go! Red is hot and is soldered to the tip of your jack. If you select a jack, this will be pre-done for you so you’ll unsolder, feed the wires through your channel, and resolder. Jacks work with standard cables only and jack sockets accept standard ¼” plugs. Both blacks are grounds. One is soldered to the jack sleeve and the other is grounded to your trem/bridge. If your selections require alternate installation, we'll include additional instructions if needed. Take your time for installation; do not use power tools and do not over-tighten or apply too much pressure on components.

~~PURCHASE NOTES~~
ASK ANY QUESTIONS PRIOR TO PURCHASE.

Buyers assume all risk of use; sales are only offered to those competent to safely and lawfully purchase and use items. Allow and expect variation in color due to photo and monitor settings, perception, lighting, as well as natural product variance. Ask any questions regarding options, fit, measurements, installation requirements, special requests, etc. prior to purchase.

Inspect your order upon receipt. We will address any issues PRIOR to installation. If everything is in order, simply install carefully to enjoy.