DFG Special Prewired Strat HH Loaded Pickguard w/ Vintage Buckers, Includes Customized VTT Wiring Layout w/ 3-Way Fender Blade Switch, CTS Pots, Switchcraft Jack, 2 Mini Switches, Solderless Connections, Choice of Colors, Styles & Wiring
Click To Enlarge

Prewired HH Strat Pickguard, DFG Special
Prewired Guard w/ Special Wiring & Layout
Dragonfire Double Humbucker Loaded Wired Guard

Customized VTT Wiring w/ 3-Way Switch & 2 Mini Switches
Choice of Pickups, Colors, Styles & Wiring Options
Custom Built to Order Prewired Guard Dragonfire Humbuckers
We wire to order ~ let us know if you need more options!

This DFG Special Series semi-customizable guard features your choice of several different pickup options and offers a unique layout option with the included (2) mini toggle switches wired between the pot controls for expanded performance, convenience, styling and functionality. For the two mini switches, you can choose one master kill switch plus one coil split for one of the humbuckers or you can choose to go with two coil splits so you can independently split each pickup.
--Kill Switch: Allows interruption of signal using an on-off, two-way toggle style mini switch.
--One Coil Split: Modifies your choice of bridge or neck humbucker to single coil performance using a toggle style mini switch.
--Two Coil Splits: Independently modifies humbuckers to single coil performance using two toggle style mini switches (1 switch per pickup).

~~Build & Guard Details~~
*Brand New Customized Prewired Pickguard
*Fender® Replacement Guard
*Standard USA & MEX/MIM 2002 & Newer Style Fit
*Protective Film Surface Cover (remove after install)
*Aluminum Shielded Electronics Area (shape/color may vary)
*Full-Size 500K Pots (large/long unless your other selections require a different style)
*3-Way Switch: Bridge / Bridge-Neck / Neck (style choice)
*3 Control Pots (your choice of styles)
*2 Mini Toggle Switches (your choice of functionality)
*View Guard Color Samples HERE

~~Pickup Details~~
*Dragonfire Bridge & Neck Humbucker Pickups
*4 Wire Pickups, Coil Split Capable
*Wax Potted for Squeal Reduction or Elimination
*Choice of Pickup Style
See related items below for pickup details and more information on the pickup styles available for this build. We can build this guard with any of our humbuckers, let us know if you want a different color or style!

~~Selection Options~~
This build is available in many colors/styles with a variety of personalization and upgrade options. These are not cookie-cutter mass-produced generic creations. All wiring is done in house, customized just for you to create your ideal guard. We know players’ needs are varied and unique. Your selections and any addition of effects or upgrades will determine ultimate layout and functionality and may necessitate, at our discretion, substitution of component styles depending on options chosen. Wiring upgrade option information can be found on our store’s Prewired landing page. Onboard effects and circuit information can be found here. Contact us if you have any questions about the options available for this build.

~~Installation Information~~
No diagrams are included. Unless you select the solderless wiring option, your loaded guard will come with three open wires. Red is hot and is soldered to the tip of your jack. If you select a jack, this will be pre-done for you so you’ll unsolder, feed the wires through your channel, and resolder. Jacks work with standard cables only and jack sockets accept standard ¼” plugs. Both blacks are grounds. One is soldered to the jack sleeve and the other is grounded to your trem/bridge. If your selections require alternate installation, additional instructions will be included in your shipment.

Take your time for installation; do not use power tools and do not over-tighten screws or other components. If you are unsure of your ability to successfully install this item, please do not purchase.

~~Purchase Notes~~
Please check your instrument and set-up needs carefully to see if this item will work for you.

Buyers assume all risk of use; sales are only offered to those competent to safely and lawfully purchase and use items.

These guards will not fit anything other than specifically noted compatible models. They will not work with non-standard components or systems. Guards are not guaranteed to fit “Squiers” and will not fit “Deluxe” “Light” any Artist Series or Reissue, or anything else other than “Fender® Standard” model guitars in the years and configuration noted. Non-standard selections may require body modifications. Your selections are your own – we will create your guard to order per your specifications so please know your needs prior to purchase.

Depending on your set-up, you may require adjustment. Ask in advance and we are happy to provide fit/compatibility information or make special arrangements if possible. Do not buy if you are unsure of your requirements, needs, or ability to make any required adjustments.

Allow and expect variation in color due to photo and monitor settings as well as natural product variance. Color, sound, performance or other descriptions are subjective as well as generic in nature. Your outcome will vary based on many factors, most importantly your own skill, style, and experience. Color descriptions indicate color only, not material. We do not recommend purchasing if you are looking for a particular outcome or are trying to match an existing color/theme on your guitar.

  • Style: Dragonfire Prewired HH Pickguard, Loaded Double Humbucker Build
  • Pickguard: Choice of Pickguard Colors and Styles in Specialized Control Layout
  • Pickup Style: No Solder Style Available, 4 Wire Humbuckers, Hot Wound Vintage Ceramic & Alnico 5 Magnet Style Options
  • Color: Choice of Colors for Guard, Pickups & Knobs, Choice of Wiring, Effects & Upgrades
  • Fit: USA / MEX 2002 & Newer Fender Standard 11 Hole Mounting
  • Features: Premium Upgrades Available Fender 3-Way Blade Switch, CTS Pots, Switchcraft Jack, Solderless Connection Style
  • Type: Customized Three Pot (VTT or VVT) Wiring with 3-Way Blade Switch and Two Mini Switches
  • Attribute: Your Choice of Kill Switch &/or Coil Split Options; Solderless Wiring, No Soldering Required
  • Item #: 22156

Prewired HH Pickguard, Loaded DFG Special 3Pot+2MS+3Way

Price: $174.95
* Marked fields are required.
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review