Prewired / Loaded HH Pickguard
Dragonfire Brown Buckers Prewired Guard
Double Humbucker Loaded Wired Guard

Your Choice of Pickup and Guard Colors
Your Choice of Wiring Styles and Upgrades
Custom Built to Order Two Humbucker Prewired Guard
Dragonfire Brown Bucker Humbucker Pickups

Prewired on a two humbucker standard strat pickguard cut for one humbucker at the bridge and one humbucker at the neck, this loaded guard offers Dragonfire Brown Bucker humbucker pickups for great, late 70's and early 80's sound. Brown Buckers deliver big, brown performance and are especially recommended for rock and classic rock genres.

We’re proud to offer many options to customize your build with possibilities designed to increase uniqueness, personalization, versatility and performance. Let us know if you have any questions about any of the available options.

~~Build & Guard Details~~
*Brand New Customized Prewired Pickguard
*Extensive Options Available
*6 String Standard Fender® Strat Replacement Guard
*Standard USA & MEX/MIM 2002 & Newer Style Fit
*One Bridge Position Humbucker & One Neck Position Humbucker
*Protective Film Surface Cover (remove after install)
*Aluminum Shielded Electronics Area (shape/color may vary)
*Full-Size 500K Pots (large/long unless your other selections require a different style)
*Sealed Style Switch Comes Standard (unless your other selections require a different style)
*Choice of Angled or Straight Bridge Humbucker Rout
*Standard Straight Neck Humbucker Rout
*View Guard Color Samples HERE

~~Pickup Details~~
*Dragonfire Passive Humbucker Brown Buckers
*Alnico 5 / Alnico V (A5 / AV) Pickup Magnet Style
*4 Wire Pickups, Coil Split Capable
*52/50 Spacing (Standard F-Spacing)
*Vacuum Wax Potted for Squeal Reduction or Elimination
*Wound to ~11.7K (Bridge) & ~8.3K (Neck)
See below in the related items section for more pickup details.

~~Selection Options~~
This build is available in many colors/styles with a variety of personalization and upgrade options. These are not cookie-cutter mass-produced generic creations. All wiring is done in house, customized just for you to create your ideal guard. We know players’ needs are varied and unique. Your selections and any addition of effects or upgrades will determine ultimate layout and functionality and may necessitate, at our discretion, substitution of component styles depending on options chosen. Wiring upgrade option information can be found on our store’s Prewired landing page. Onboard effects and circuit information can be found here. Contact us if you have any questions about the options available for this build.

~~Installation Information~~
No diagrams are included. Unless you select the solderless wiring option, your loaded guard will come with three open wires. Red is hot and is soldered to the tip of your jack. If you select a jack, this will be pre-done for you so you’ll unsolder, feed the wires through your channel, and resolder. Jacks work with standard cables only and jack sockets accept standard ¼” plugs. Both blacks are grounds. One is soldered to the jack sleeve and the other is grounded to your trem/bridge. If your selections require alternate installation, additional instructions will be included in your shipment. Take your time for installation; do not use power tools and do not over-tighten screws or other components.

~~Purchase Notes~~
Please check your instrument and set-up needs carefully to see if this item will work for you.

Buyers assume all risk of use; sales are only offered to those competent to safely and lawfully purchase and use items.

These guards will not fit anything other than specifically noted compatible models. They will not work with non-standard components or systems. Guards are not guaranteed to fit “Squiers” and will not fit “Deluxe” “Light” any Artist Series or Reissue, or anything else other than “Fender® Standard” model guitars in the years and configuration noted. Non-standard selections may require body modifications. Your selections are your own – we will create your guard to order per your specifications so please know your needs prior to purchase.

Depending on your set-up, you may require adjustment. Ask in advance and we are happy to provide fit/compatibility information or make special arrangements if possible. Do not buy if you are unsure of your requirements, needs, or ability to make any required adjustments.

Allow and expect variation in color due to photo and monitor settings as well as natural product variance. Color, sound, performance or other descriptions are subjective as well as generic in nature. Your outcome will vary based on many factors, most importantly your own skill, style, and experience. Color descriptions indicate color only, not material. We do not recommend purchasing if you are looking for a particular outcome or are trying to match an existing color/theme on your guitar.

Inspect your order upon receipt. We will address any issues prior to installation. Contact us with any questions.