Push-Pull Control Pot, Dime Size/Small
Mini Pot, Long Shaft, DPDT Pot
Split Shaft Style Pot for Guitar or Bass
Choice of 25K, 250K or 500K ohm Style Options
Choice of Audio “A” Pot or Linear “B” Pot Style Options

ITEM DESCRIPTION
This is a small, long-shaft, body mount, push-pull DPDT control pot. If you are going through a guard, you may need additional nuts or lock washers (not included). If needed, simply use the drop-down selection box to add a 4-piece set (2 hex mounting nuts + 2 standard flat washers) or an 8-piece set (4 hex mounting nuts + 4 standard flat washers). Of course, your set-up may be different. Be sure to check your requirements in relation to the measurements provided for this item. Ask any fit or compatibility questions prior to purchase.

For an easy modification or upgrade that produces noticeable results, this push pull control pot will provide most players with a more precise response to manipulation. These will work with most coarse knurled, 18-spline style knobs.

Your choice of OHM style: 25K, 250K or 500K. Higher pot 500K values typically lend a brightness to your sound while the 250K lower value pots typically result in a bit more playing warmth. Many players prefer pairing humbuckers with 500K pots and single coils pickups with 250K pots. You might switch it up depending on your style and what you are looking for in terms of performance. 25K pots are used with active pickups.

Your choice of pot style ~ Audio (aka “A” pot or “Aud” pot) or Linear Taper (aka “B” pot or “Lin” pot). Some players believe audio pots provide a smoother volume roll, while others like the linear pots better for tone transitioning. It’s a personal playing preference as performance will vary based on many factors, including style, equipment and skill.

Please check your measurements carefully to see if this item will work for your set-up.

PRODUCT HIGHLIGHTS
*Small Pot (aka Dime Size or Mini Pot)
*DPDT Switch Style (6 Poles)
*Double Pole, Double Throw Style
*3 Soldering Tabs/Lugs
*Long Shaft Style Body Mount
*Split Shaft 18 Spline Style
*Metal Alloy/Aluminum Bushing
*Smooth Operation ~ Gradual Gain/Loss
*Tolerance: +/- 10%

APPROXIMATE MEASUREMENTS
*Shaft Length: 18mm
*Pot Diameter: 16.5mm
*Overall Pot Height: 45mm
*Threaded Bushing Height: 18mm
*Required Hole Diameter: 10mm
*Mounting Nut Diameter: 9mm (inner) & 11mm (outer)
*Mounting Nut Depth: 2mm
*Washer Diameter: 9mm (inner) & 12mm (outer)
*Cavity Depth Required: 28mm
Measurements provided are approximations; variability is to be expected. Ask any questions prior to purchase.

WHAT’S INCLUDED (What You Get)
*1 Control Pot
*1 Standard Flat Washer
*1 Hex Mounting Nut
Nothing else is included. Additional images may be provided for reference and comparison purposes only.

PURCHASE NOTES
Buyers assume all risk of use; sales are only offered to those competent to safely and lawfully purchase and use items.
ASK ANY QUESTIONS PRIOR TO PURCHASE. Instructions for installation are NOT INCLUDED or provided.
Inspect your order upon receipt; we pledge to address any issues PRIOR to installation.