Control Pot ~ LARGE/Quarter Size

SHORT Shaft BRASS Bushing
Standard Large Control Pot, Short Brass Shaft
Split Shaft Style Pot for Guitar or Bass
Quarter Size, Large Pot Style

Choice of 250K or 500K ohm Style Options

Choice of Audio “A” Pot or Linear “B” Pot Style Options

ITEM DESCRIPTION
This pot is offered as an Audio Style Pot or Linear Style Pot (your choice) with brass bushing for an easy mod that can produce noticeable results.

This body mount, large, short-shaft control pot can provide more precise response to manipulation. If you are going through a guard, you may need additional nuts or lock washers (not included). If needed, simply use the drop-down selection box to add a 4-piece set (2 hex mounting nuts + 2 standard flat washers) or an 8-piece set (4 hex mounting nuts + 4 standard flat washers).

Of course, your set-up may be different. Be sure to check your requirements in relation to the measurements provided for this item. Ask any fit or compatibility questions prior to purchase.

Your choice of OHM style: 250K or 500K. A control potentiometer is a variable resistor controlling the signal strength. “K” is the reference to the resistance rating of the pot (kOhms). Higher pot 500K values typically lend a brightness to your sound while the 250K lower value pots typically result in a bit more playing warmth. Many players prefer pairing humbuckers with 500K pots and single coils pickups with 250K pots. You might switch it up depending on your style and what you are looking for in terms of performance.

Your choice of pot style ~ Audio (aka “A” pot or “Aud” pot) or Linear Taper (aka “B” pot or “Lin” pot). Both types of pots will be at ~0% in the min position and ~100% in the max position. Some players believe audio pots provide a smoother volume roll or transition, while others like the linear pots better for tone transitioning. It’s really a personal playing preference as performance will vary based on many factors, including style, equipment and skill.

These pots will work with most coarse knurled, 18-spline style knobs.

PRODUCT HIGHLIGHTS
*Large Pot (Quarter Size)
*3 Soldering Tabs/Lugs
*Short Shaft Style Guard Mount
*Split Shaft 18 Spline Style
*Brass Bushing
*Smooth Operation ~ Gradual Gain/Loss
*Tolerance: +/- 10%

APPROXIMATE MEASUREMENTS
*Shaft Length: 15mm
*Pot Diameter: 24mm
*Overall Pot Height: 26mm
*Threaded Bushing Height: 6mm
*Required Hole Diameter: 10mm
*Mounting Nut Diameter: 9mm (inner) & 11mm (outer)
*Mounting Nut Depth: 2mm
*Washer Diameter: 9mm (inner) & 12mm (outer)
*Cavity Depth Required: 12mm
Measurements provided are approximations; variability is to be expected. Ask any questions prior to purchase.

WHAT’S INCLUDED (What You Get)
*1 Control Pot
*1 Standard Flat Washer
*1 Hex Mounting Nut
Nothing else is included. Additional images may be provided for reference and comparison purposes only.

PURCHASE NOTES
Buyers assume all risk of use; sales are only offered to those competent to safely and lawfully purchase and use items.
ASK ANY QUESTIONS PRIOR TO PURCHASE. Instructions for installation are NOT INCLUDED or provided.
Inspect your order upon receipt; we pledge to address any issues PRIOR to installation.