CTS Control Pot, Large/Quarter Size
Long Shaft, Audio or Linear Style Pot
Split Shaft Style CTS Pot for Guitar or Bass
Choice of 250K (A250K/B250K) or 500K (A500K/B500K) ohm Style Options

ITEM DESCRIPTION
This C T S Audio or Linear Style Control Pot is a great option for noticeable results from an easy modification or upgrade. Most players will be able to gain a more precise response to manipulation with these split-shaft pots. These will work with most fine knurled, 24-spline style knobs.

This is a large, long-shaft, body mount control pot. If you are mounting through a pickguard, you may need additional nuts or lock washers (not included). Of course, your set-up may be different. Be sure to check your requirements in relation to the measurements provided for this item. Ask any fit or compatibility questions prior to purchase.

Audio Taper (“A” pot) or Linear Taper (“B” pot) styles are available. Players will often use B Pots for volume and A pots for tone, but it’s really a personal preference. We also offer your choice of OHM style: 250K or 500K. A control potentiometer is a variable resistor controlling the signal strength. “K” is the reference to the resistance rating of the pot (kOhms). Higher pot 500K values typically lend a brightness to your sound while the 250K lower value pots typically result in a bit more playing warmth. Many players prefer pairing humbuckers with 500K pots and single coils pickups with 250K pots. You might switch it up depending on your style and what you are looking for in terms of performance.

Please check your measurements carefully to see if this item will work for your set-up.

PRODUCT HIGHLIGHTS
*Large Pot (Quarter Size)
*3 Soldering Tabs/Lugs
*Long Shaft Style Body Mount
*Split Shaft 24 Spline Style
*Metal Alloy/Aluminum Bushing
*Smooth Operation ~ Gradual Gain/Loss
*Tolerance: +/- 10%

APPROXIMATE MEASUREMENTS
*Shaft Length: 18mm
*Pot Diameter: 24mm
*Overall Pot Height: 31mm
*Threaded Bushing Height: 11mm
*Required Hole Diameter: 10mm
*Mounting Nut Diameter: 10mm (inner) 12.6mm (outer)
*Mounting Nut Depth: 2mm
*Washer Diameter: 10mm (inner) & 16mm (outer)
*Cavity Depth Required: 12mm
Measurements provided are approximations; variability is to be expected. Ask any questions prior to purchase.

WHAT’S INCLUDED (What You Get)
*1 Control Pot
*1 Standard Flat Washer
*1 Lock Washer
*1 Hex Mounting Nut
Nothing else is included. Additional images may be provided for reference and comparison purposes only.

PURCHASE NOTES
Buyers assume all risk of use; sales are only offered to those competent to safely and lawfully purchase and use items.
ASK ANY QUESTIONS PRIOR TO PURCHASE. Instructions for installation are NOT INCLUDED or provided.
Inspect your order upon receipt; we pledge to address any issues PRIOR to installation.