LP Style CTS PUSH-PULL Control Pot
LARGE Extra Long Brass Shaft
Great for Many Les Pauls®
XLBS A500K ~ DPDT Pot
CTS Push-Pull Control Pot, Large/Quarter Size
Split Shaft Pot for Gibson Les Pauls
Audio Style 500K Pot (A500K)

ITEM DESCRIPTION
For an easy modification or upgrade that produces noticeable results, this CTS Push/Pull pot for Les Pauls is a great option. This Audio Style 500K Pot (aka “A Pot” or “Aud Pot”) is a switching pot so you’ll be able to add a switch effect without adding another hole. There are many different wiring options for this pot and most players will be able to gain a more precise response to manipulation with these split-shaft pots.

This large, extra-long, split-shaft control pot and mounts through the body and ground plate of most LPs. The included hex mounting nuts give you the ability to adjust your height. Of course, your set-up may be different and you may require additional nuts or lock washers (not included). Be sure to check your requirements in relation to the measurements provided for this item. Ask any fit or compatibility questions prior to purchase.

PRODUCT HIGHLIGHTS
*Large Pot (Quarter Size)
*DPDT Switch Style (6 Poles)
*Double Pole, Double Throw Style
*3 Soldering Tabs/Lugs
*Extra Long Shaft Style Body/Plate Mount
*Split Shaft 24 Spline Style
*Brass Bushing
*Smooth Operation ~ Gradual Gain/Loss
*Resistance Tolerance: +/- 10%

APPROXIMATE MEASUREMENTS
*Shaft Length: 24mm
*Pot Diameter: 24mm
*Overall Pot Height: 55mm (down) & 59mm (up)
*Threaded Bushing Height: 21mm
*Required Hole Diameter: 10mm
*Mounting Nut Diameter: 10mm (inner) & 13mm (outer)
*Mounting Nut Depth: 2mm
*Washer Diameter: 10mm (inner) & 17mm (outer)
Measurements provided are approximations; variability is to be expected. Ask any questions prior to purchase.

WHAT’S INCLUDED (What You Get)
*1 Control Pot
*1 Standard Flat Washer
*2 Hex Mounting Nuts
Nothing else is included. Additional images may be provided for reference and comparison purposes only.

PURCHASE NOTES
Buyers assume all risk of use; sales are only offered to those competent to safely and lawfully purchase and use items.

ASK ANY QUESTIONS PRIOR TO PURCHASE. Instructions for installation are NOT INCLUDED or provided.

Note that we do not recommend installation using power tools as these can put too much force on the product and cause damage. Installation is best with moderate heat only (don’t have your iron too hot). Pay attention during install to avoid damage; components are sensitive. Excessive or prolonged heat can cause irreparable damage.

Inspect your order upon receipt; we pledge to address any issues PRIOR to installation.