ACTIVE P BASS Pickup Set 1 P Bass Split Pickup Brand New Matched 4 String P-Bass Pickup Passive Precision Set, The Split P Bass Pickups in this Dragonfire Active P Set provide hot active output and clarity with the sound...
Click To Enlarge

Dragonfire ACTIVE P BASS Pickup Set
P Bass Active Pickup Kit, Matched 4-String
P Bass Active Kit Includes Pickup Set, Pads, Pickup Screws, Pots, Battery Clip, Jack, Tone Cap

The Split P Bass Pickups in this Dragonfire Active P Set provide hot active output and clarity with the sound isolating and low interference performance typically associated with an active pickup. These noiseless pickups excel in the low to midrange while still allowing for high end response, freer vibration, and low-end thump, adding nice dimension to your playing. The eight-pole design (4 each split) on these single-coil wax potted P Pickups will work for your fretted or fretless 4-string bass. Wax potting on the coils and an epoxy seal on the pickups help isolate sound, increase noise suppression, and reduce feedback as well as or other undesirable output.

Featuring ceramic magnets, better balance, increased sustain and output across the strings, these Active Jazz Pickups are a must-have for the serious player. Better performance maintenance regardless of volume level along with reduced overtone and balanced signal conversion make these pups stand out in the crowd. If you want less hum, more snap, clean signal and sharpness, look no further! Each pickup comes wired with a white (hot) wire, bare (ground) wire, and battery wire plus black pickup connection wire (roughly 6” in length).

These precision-style pickups are single-coil split for two distinct pickups wound opposite from each other. This wiring allows for more even tonal capability and balanced sound along with reduced hum. These are great for big, substantial playing styles with the thickness and thump you need in most styles of play.

The cover dimensions for these pickups are a bit larger than US standard sizing. If you are direct-mounting, there is generally no problem. If you are using a guard, some pickguard modification may be required for proper fit. Bass pickup dimensions have varied over time so be sure to check your cavity and available space with the approximate measurements for these pickups provided below.

*Brand New Set of Active P-Bass Pickups
*Works with 4-String Bass Guitars
*Precision Set Ceramic Magnet Style
*Epoxy Sealed Pickups
*These are ACTIVE pickups and require a 9v battery (not included)
*Noiseless (Please note that noise and interference can come from sources other than your pickup!)
*Adhesive Backing on Pickup Pad (one side)
*Mounting Screw Head Type: Phillips Pan Style Head (not counter-sunk)
*Larger Style Pickup Covers (typically not a problem for direct mounting – check measurements carefully)

*Length: 72mm (57mm excluding screw flanges)
*Width: 28mm
*Depth/Height: 22.2mm
*Pickup Screw Flange Spacing (center:center): 65mm
*Pickup Pad Measurements: 39.5mm x 18.2mm x 13.5mm
*Mounting Screws: 4.2mm (Head Diameter) & 37.5mm (Length)
Measurements provided are approximations; variability is to be expected.

*1 P Bass Active Pickup Set
*2 Foam Pickup Pads
*4 Pickup Mounting Screws (your choice of color)
*2 25K Pots
*1 Battery Clip
*1 Jack
*1 .1 Tone Cap
*BASIC Wire Color Codes
Nothing else is included. Any extra images are provided for additional reference and comparison purposes only.

ASK ANY QUESTIONS PRIOR TO PURCHASE. Buyers assume all risk of use; sales are only offered to those competent to safely and lawfully purchase and use items. Allow and expect variation in color due to photo and monitor settings, perception, lighting, as well as natural product variance.

Instructions for installation are NOT included. Due to the vast and varied nature of possible set-ups, we do not provide specific information or diagrams for installation. You should be able to use basic knowledge of wiring with the diagram or instructions of your choice.

Installation requires soldering and compatible system. We provide enough pickup lead wire to complete installation wiring in standard usage situations. If you require additional length, let us know PRIOR to purchase. Take your time for installation; do not use power tools and do not over-tighten or apply too much pressure on components.

Inspect your order upon receipt. We will address any issues PRIOR to installation. If everything is in order upon receipt, simply install carefully to enjoy.

  • Item #: 2089

Active P Bass 4 String Split Pickup Set Kit, Cover Choice

Price: $69.95
* Marked fields are required.
Qty: *
Reviews (1) Write a Review
No Reviews. Write a Review