Dragonfire ACTIVE JAZZ BASS Pickups
4-String JAZZ BASS Active Pickups
Choice of Colors
Choice of Individual Pickup or Pickup Set
Brand New 4 String J Bass Pickups

The Dragonfire Active Jazz Bass Pickups in this Jazz Pickup category provide hot active output and clarity with the sound isolating and low interference performance typically associated with an active pickup. These noiseless jazz pickups excel in the midrange while still allowing for high-end response, freer vibration, and low-end thump, adding a nice dimension to your playing. The design on these single-coil J Pickups works for your fretted or fretless 4-string bass. Wax potting on the coils and an epoxy seal on the pickups help isolate sound, increase noise suppression, and reduce feedback as well as other undesirable output.

Featuring ceramic magnets, better balance, increased sustain and output across the strings, these Active Jazz Pickups are a must-have for the serious player. Better performance maintenance regardless of volume level along with reduced overtone and balanced signal conversion make these pups stand out in the crowd. If you want less hum, more snap, clean signal and sharpness, look no further! Each pickup comes wired with a colored (hot) wire, black (ground) wire, and battery wire. Choose a single bridge, a single neck or a matched set that is collaborative so the pickups will work in conjunction with one another for best possible performance.

Bass pickup dimensions have varied over time so be sure to check your cavity and available space with the approximate measurements for these pickups (provided below).

~~PRODUCT HIGHLIGHTS~~
*Brand New J-Bass Active Pickup
*For 4-String Bass Guitars
*Ceramic Magnet Style
*Epoxy Sealed Pickups
*These are ACTIVE pickups and require a 9v battery (not included)
*Noiseless (Please note that noise and interference can come from sources other than your pickup!)
*Adhesive Backing on Pickup Pad (one side)

~~APPROXIMATE MEASUREMENTS~~
*Length: 95mm (Bridge) & 92mm (Neck)
*Width: 30mm (19mm excluding screw flanges)
*Depth/Height: 23mm
*Bridge Mounting Screw Spacing: 40mm x 24mm
*Neck Mounting Screw Spacing: 37mm x 24mm
*Pickup Pad Measurements: 64mm x 14mm x 13mm
*Mounting Screws: 4.2mm (Head Diameter) & 37.5mm (Length)
Measurements provided are approximations; variability is to be expected. Ask any questions regarding options, measurements, installation, requirements, special requests, etc. prior to purchase.

~~WHAT’S INCLUDED (What You Get)~~
*Your Choice of 1 Bridge, 1 Neck or 1 Set of Pickups
*Pickup Mounting Screws (4 per pickup ordered)
*J Bass Pickup Foam Cushion Pad (1 per pickup ordered)
*1 Battery Clip
*BASIC Wire Color Codes

Set Purchases also come with the following (not included with individual pickup purchases):
*3 25K Pots
*1 Jack
*1 .1 Tone Cap

Nothing else is included. Any extra images are provided for additional reference and comparison purposes only.

~~PURCHASE NOTES~~
ASK ANY QUESTIONS PRIOR TO PURCHASE.

Buyers assume all risk of use; sales are only offered to those competent to safely and lawfully purchase and use items. Allow and expect variation in color due to photo and monitor settings, perception, lighting, as well as natural product variance. Color descriptions indicate color of item, not material.

Instructions for installation are NOT included. Due to the vast and varied nature of possible set-ups, we do not provide specific information or diagrams for installation. You should be able to use basic knowledge of wiring with the diagram or instructions of your choice.

Installation requires soldering and compatible system. We provide enough pickup lead wire to complete installation wiring in standard usage situations. If you require additional length, let us know PRIOR to purchase. Take your time for installation; do not use power tools and do not over-tighten or apply too much pressure on components.

Inspect your order upon receipt. We will address any issues PRIOR to installation. If everything is in order, simply install carefully to enjoy.