Dragonfire 18V Modification Harness for Active Pickups
Choice of Styles (Mod Only, 9/18V w/ Mini Switch, or 9/OFF/18V w/ Mini Switch)

ITEM DESCRIPTION
Connects two batteries to your existing battery connection clip to double your active pickup power source.
Most active pickups are rated at 27V. These harnesses allow you to expand your playing time and versatility of playing options by allowing for connection of two batteries as well as switch mods. After attaching one of the clips on this wiring mod to your existing guitar electronics battery connector, you’ll gain time between battery changes with the two connected batteries as well as your choice of the following battery and switch modifications.
This mod offers an inexpensive and easy way to change up your playing options. Includes a foam battery pouch to protect your electronics.

Standard 18V Modifier for EMG & Active Pickups (Mod Only)
Battery clip modifier only; no mini switch. No permanent modification required (unclip to go back to your original set-up).

9/18v Mini Switch Harness Modifier (Mod + 2 Way Mini Switch)
Battery Clip Modifier and 2 Way Mini Switch that allows you to go from 9V to 18V, and back again!
This Mini Switch, Two Position Toggle Style Pickup Selector 2 Way Switch is a brand new On-On or On-Off 2 Way Switch for coil tapping, kill switch capability, as well as other applications. Shaft/handle color choices available. This Two Position Toggle Mini Switch can be used as an On-On switch or an On-Off switch, depending on your wiring. This switch is a DPDT (double pole, double throw) style.
2 WAY MINI SWITCH HIGHLIGHTS
*Poles/Terminals: 6 for DPDT or 3 for SPST
*2 Nuts, 1 Washer, & 1 Lock Washer are included for installation
*Shaft/handle color choices available
Approximate Switch Measurements
*Shaft Diameter: 5.85mm
*Overall Height (Bottom of Poles to Top of Switch Tip): 34mm
*Overall Length x Width: 13mm x 13mm (DPDT)
*Overall Length x Width: 13mm x 7mm (SPST)

9/OFF/18v Mini Switch Harness Modifier (Mod + 3 Way Mini Switch)
Battery Clip Modifier and 3 Way Mini Switch that allows you to go from 9V to OFF to 18V and back again!
This Mini Switch, Three Position Toggle Style Pickup Selector 3 Way Switch is a brand new On-Off-On 3 Way Switch for coil tapping, phase reversal, as well as other applications. Three Position On-Off-On switches are typically used for coil splitting (single coil, off, humbucker) or phase tampering (in phase, off, out of phase). This is a DPDT (double pole, double throw) style switch.
3-WAY MINI SWITCH HIGHLIGHTS
*Poles/Terminals: 6 for DPDT
*2 Nuts, 1 Washer, & 1 Lock Washer are included for installation
*Shaft/handle color choices available
Approximate Switch Measurements
*Shaft Diameter: 5.85mm
*Overall Height (Bottom of Poles to Top of Switch Tip): 34mm
*Overall Length x Width: 13mm x 13mm

WHAT’S INCLUDED
*1 Quantity Harness Modifier for Active Pickups

Soldering is required for installation. No instructions or diagrams are included. Please do not purchase if you are unsure of your ability to successfully complete installation. Color reference descriptions represent color only, not material. Please allow and expect variation in color due to photo and monitor settings as well as natural product variance. Contact us prior to purchase if you have any questions regarding compatibility or fit.